Reinstalling/Using Washer Again - Maytag 7MMVW7230LW Use & Care Manual

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
26

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,
or moving:
1. Refer to "Installation & Care Instructions Manual" to locate,
level, and connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through Voluminosos (Bulky Items) cycle to
clean washer and remove antifreeze, if used. Use only HE
(High Efficiency) detergent. Use ½ the manufacturer's
recommended amount for a medium-size load.