After Finishing Work; Storing The Machine; Cleaning The Air Filter - Stihl SR 200 Instruction Manual

15 After Finishing Work

15 After Finishing Work
► Close the valve lever.
► Shut off the engine – see "Starting / Stopping
the Engine".
15.1 Draining the Solution Container
► Turn metering knob (1) to 6.
► Open the valve lever and drain remaining sol‐
ution into a suitable container.
15.2 Cleaning the Solution Con‐
tainer
► Rinse and clean the solution container and
hose system with clear water.
► Dispose of remaining spray solution and rins‐
ing liquid in accordance with local environmen‐
tal requirements – follow maker's instructions.
► Allow the unit to dry with the cap removed.
If strainer is dirty:
► Insert a suitable tool (e.g. screwdriver) in the
two recesses (arrows) to loosen the
strainer (2).
► Pull the strainer (2) upward and out of the sol‐
ution container.
0458-457-0121-C
1
► Clean the strainer (2) with clear water and a
brush.

16 Storing the Machine

► Store the machine in a dry, frost-free and
secure location. Keep out of the reach of chil‐
dren and other unauthorized persons
16.1 If not used for periods of about
30 days or longer
► Drain and clean the fuel tank in a well ventila‐
ted area.
► Dispose of fuel properly in accordance with
local environmental requirements.
► If a manual fuel pump is fitted: Press the man‐
ual fuel pump at least 5 times.
► Start the engine and run it at idling speed until
it stops
► Thoroughly clean the machine, especially the
cylinder fins and air filter
► Do not expose the solution container to direct
sunlight for unnecessarily long periods. UV
rays can make the container material brittle,
which could result in leaks or breakage.

17 Cleaning the Air Filter

17.1 If there is a noticeable loss of
engine power
► Turn the filter cover lock (1) counterclockwise
to the vertical position.
English
2
1
19