Starting / Stopping The Engine - Stihl SR 200 Instruction Manual

9 Starting / Stopping the Engine

9 Starting / Stopping the
Engine
9.1 Before Starting
► Close valve lever (1) for solution feed.
9.2 Start the engine.
► Observe safety precautions.
NOTICE
Start your unit on a clean, dust-free surface only
to ensure that no dust is sucked in.
► The setting lever must be on F
► Press the manual fuel pump bulb at least five
times – even if the bulb is filled with fuel.
0458-457-0121-C
Cold Engine (cold start)
1
► Turn the choke knob to g.
Warm Engine (warm start)
► Turn the choke knob to <.
Also use this setting if the engine has been run‐
ning but is still cold.
Cranking
English
13