Siemens SIMATIC NET RUGGEDCOM RX1510 Installation Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Switch
  5. SIMATIC NET RUGGEDCOM RX1510
  6. Installation manual
Siemens SIMATIC NET RUGGEDCOM RX1510 Installation Manual

Siemens SIMATIC NET RUGGEDCOM RX1510 Installation Manual

Rugged multi service platforms
Hide thumbs Also See for SIMATIC NET RUGGEDCOM RX1510:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
Installation Manual
SIMATIC NET
Rugged Multi Service Platforms
RUGGEDCOM RX1510
Edition
12/2019
https://www.siemens.com

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC NET RUGGEDCOM RX1510

Summary of Contents for Siemens SIMATIC NET RUGGEDCOM RX1510

  • Page 1 All manuals and user guides at all-guides.com Installation Manual SIMATIC NET Rugged Multi Service Platforms RUGGEDCOM RX1510 Edition 12/2019 https://www.siemens.com...
  • Page 2 All manuals and user guides at all-guides.com Preface Introduction Installing the Device SIMATIC NET Device Management Rugged Multi Service Platforms RUGGEDCOM RX1510 Modules Technical Specifications Installation Manual Certification 12/2019 C79000-G8976-1055-16...
  • Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommend- ed or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 4: Table Of Contents

    Accessing Documentation ....................... v Disclaimer of Liability ......................v Registered Trademarks ......................vi Training ..........................vi Customer Support ........................vi Contacting Siemens ....................... vii Introduction ........................... 1 Feature Highlights ....................1 Description ......................1 Required Tools and Materials ................. 3 Decommissioning and Disposal ................
  • Page 5 All manuals and user guides at all-guides.com Table of Contents Power Supply Specifications ................43 Failsafe Relay Specifications ................43 Operating Environment ..................44 Mechanical Specifications ..................44 Dimension Drawings ................... 44 Certification ......................... 47 Approvals ......................47 6.1.1 TÜV SÜD ......................47 6.1.2 European Union (EU) ..................

  • Page 6: Preface

    However, deviations between the product and the documentation may exist. Siemens shall not be liable for any errors or omissions contained herein or for conse- quential damages in connection with the furnishing, performance, or use of this ma- terial.

  • Page 7: Registered Trademarks

    Siemens Sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request...

  • Page 8: Contacting Siemens

    Contacting Siemens • Submit SRs or check on the status of an existing SR • Contact a local Siemens representative from Sales, Technical Support, Training, etc. • Ask questions or share knowledge with fellow Siemens customers and the support community...
  • Page 9 All manuals and user guides at all-guides.com Preface Contacting Siemens viii RUGGEDCOM RX1510 Installation Manual, 12/2019, C79000-G8976-1055-16...

  • Page 10: Introduction

    All manuals and user guides at all-guides.com Introduction The RUGGEDCOM RX1510 is a cost-efficient, rugged Layer 3 switch and router. The RUGGEDCOM RX1510’s modular and field replaceable platform can be equipped with WAN, serial, and Ethernet options, making it ideally suited for electric power utilities, the industrial plant floor, and traffic control systems.
  • Page 11 All manuals and user guides at all-guides.com Introduction 1.2 Description Utility USB Port RS232 Serial Console Port (RJ45) Lamp Test/Alarm Cut-Off (LT/ACO) Button Compact Flash Card Port Alarm Indicator LED Port Status LEDs Management Port Figure 1.1 RUGGEDCOM RX1510 Management Port This 10/100Base-T Ethernet port is used for system management that is out-of-band from the switch fabric.

  • Page 12: Required Tools And Materials

    All manuals and user guides at all-guides.com Introduction 1.3 Required Tools and Materials • Red = Alarm Compact Flash Card Port Houses the CompactFlash (CF) card that contains active and back- up installations of RUGGEDCOM RUGGEDCOM RX1510, along with the configuration database and other system data. For more infor- mation, refer to "Accessing the CompactFlash Card (Page 20)".

  • Page 13: Cabling Recommendations

    Siemens also does not recommend using copper Ethernet ports to interface with de- vices in the field across distances that could produce high levels of ground potential rise (i.e.

  • Page 14: Installing The Device

    This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens AG could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment.

  • Page 15: General Procedure

    Inspect the package for damage before opening it. Visually inspect each item in the package for any physical damage. Verify all items are included. NOTICE If any item is missing or damaged, contact Siemens for assistance. RUGGEDCOM RX1510 Installation Manual, 12/2019, C79000-G8976-1055-16...

  • Page 16: Mounting The Device

    All manuals and user guides at all-guides.com Installing the Device 2.3 Mounting the Device Mounting the Device The RUGGEDCOM RX1510 is designed for maximum mounting and display flexibility. It can be equipped with connectors that allow it to be installed in a 35 mm (1.4 in) DIN rail, or directly on a panel.

  • Page 17: Mounting The Device To A Panel

    All manuals and user guides at all-guides.com Installing the Device 2.3.2 Mounting the Device to a Panel 2.3.2 Mounting the Device to a Panel For panel installations, the RUGGEDCOM RX1510 can be equipped with panel/DIN rail adapters pre-installed on each side of the chassis. The adapters allow the device to be attached to a panel using screws.

  • Page 18: Connecting Power

    All manuals and user guides at all-guides.com Installing the Device 2.5 Connecting Power curs. For more information, refer to the RUGGEDCOM RX1510 User Guide for the RUGGEDCOM RX1510. The following shows the proper relay connections. Normally Open Common Normally Closed Figure 2.3 Failsafe Alarm Relay Wiring Connecting Power The RUGGEDCOM RX1510 supports dual redundant high AC, high DC and/or low DC...

  • Page 19: Connecting High Ac/Dc Power

    All manuals and user guides at all-guides.com Installing the Device 2.5.1 Connecting High AC/DC Power • The maximum wire length between the terminal block and power source must not exceed 6 m (20 ft) for 24 V power supplies or 18 m (60 ft) for 48 V power supplies.
  • Page 20 All manuals and user guides at all-guides.com Installing the Device 2.5.1 Connecting High AC/DC Power Connect the power supply terminal block to the device. European-style (Euroblock) Terminal Block Positive/Live (+/L) Terminal Ground Terminal Negative/Neutral (-/N) Terminal Figure 2.4 AC Terminal Block Wiring – European-style (Euroblock) Terminal Block for HIP Power Supplies Not Connected Removable Screw Terminal Block...
  • Page 21 All manuals and user guides at all-guides.com Installing the Device 2.5.1 Connecting High AC/DC Power Connect the positive wire from the power source to the positive/live (+/L) termi- nal on the terminal block. Connect the negative wire from the power source to the neutral/negative (-/N) terminal on the terminal block.

  • Page 22: 2.5.2 Connecting Low Dc Power

    All manuals and user guides at all-guides.com Installing the Device 2.5.2 Connecting Low DC Power Using a #10 ring lug and #10-32 screw, secure the ground terminal on the pow- er source to the ground connection on the device. Make sure the lug is tight- ened to 1.1 N·m (9.5 lbf·in).
  • Page 23 All manuals and user guides at all-guides.com Installing the Device 2.5.2 Connecting Low DC Power Connect the power supply terminal block to the device. European-style (Euroblock) Terminal Block Positive (+) Terminal Negative (-) Terminal Ground Terminal Figure 2.8 DC Terminal Block Wiring – European-style (Euroblock) Terminal Block for 12P, 24P and 48P Power Supplies Not Connected Removable Screw Terminal Block...
  • Page 24 All manuals and user guides at all-guides.com Installing the Device 2.5.2 Connecting Low DC Power Figure 2.9 DC Terminal Block Wiring – Screw Terminal Block for 12P, 24P and 48P Power Supplies Not Connected European-style (Euroblock) Terminal Block Positive (+) Terminal Negative (-) Terminal Ground Terminal Figure 2.10 DC Terminal Block Wiring –...
  • Page 25 All manuals and user guides at all-guides.com Installing the Device 2.5.2 Connecting Low DC Power Ground Terminal Figure 2.11 DC Terminal Block Wiring – Screw Terminal Block for -12P, -24P and -48P Pow- er Supplies Connect the positive wire from the power source to the positive (+) terminal on the terminal block.
  • Page 26 All manuals and user guides at all-guides.com Installing the Device 2.5.2 Connecting Low DC Power Using a #10 ring lug and #10-32 screw, secure the ground terminal on the pow- er source to the ground connection on the device. Make sure the lug is tight- ened to 1.1 N·m (9.5 lbf·in).
  • Page 27 All manuals and user guides at all-guides.com Installing the Device 2.5.2 Connecting Low DC Power RUGGEDCOM RX1510 Installation Manual, 12/2019, C79000-G8976-1055-16...

  • Page 28: Device Management

    All manuals and user guides at all-guides.com Device Management This section describes how to connect to and manage the device. Connecting to the Device The following describes the various methods for accessing the RUGGEDCOM RX1510 console and Web interfaces on the device. For more detailed instructions, refer to the RUGGEDCOM ROX User Guide for the RUGGEDCOM RX1510.

  • Page 29: Configuring The Device

    All manuals and user guides at all-guides.com Device Management 3.2 Configuring the Device For information about how to connect to the device via the serial console port, refer to the RUGGEDCOM ROX CLI User Guide for the RUGGEDCOM RX1510. For information about how to connect to the device via the management port, refer to either the RUGGEDCOM ROX Web Interface User Guide or the RUGGEDCOM ROX CLI User Guide for the RUGGEDCOM RX1510.
  • Page 30 Configuration hazard – risk of data corruption/loss. The following will void the war- ranty and potentially result in configuration data corruption/loss: • Using a CF card not approved by Siemens for use with this device • Removing the CF card in any scenario other than those described in this section...
  • Page 31 All manuals and user guides at all-guides.com Device Management 3.3 Accessing the CompactFlash Card Insert the CF card into the slot until it is fully seated. CompactFlash Card Access Panel Figure 3.3 Inserting the CF Card Secure the CF card access panel to the chassis. Removing the CF card To remove the CF card from the device, do the following: Make sure the device is powered down.
  • Page 32 All manuals and user guides at all-guides.com Device Management 3.3 Accessing the CompactFlash Card Remove the CF card access panel. Ejector Button CompactFlash Card Access Panel Figure 3.4 Removing the CF Card Press the ejector button to the left of the CF card and then pull the card out. Secure the CF card access panel to the chassis.
  • Page 33 All manuals and user guides at all-guides.com Device Management 3.3 Accessing the CompactFlash Card RUGGEDCOM RX1510 Installation Manual, 12/2019, C79000-G8976-1055-16...

  • Page 34: Modules

    All manuals and user guides at all-guides.com Modules The RUGGEDCOM RX1510 features slots for up to two field-replaceable line modules, which can be used to expand and customize the capabilities of the device to suit spe- cific applications. A variety of modules are available, each featuring a specific type of communication port: copper Ethernet, fiber optic Ethernet, SFP, WAN, cellular mo- dem and DDS.

  • Page 35: Available Modules

    All manuals and user guides at all-guides.com Modules 4.1 Available Modules Available Modules The following is a list of all power and line modules available for use in the RUGGED- COM RX1510. For more information about individual modules, refer to the RUGGEDCOM RX1500 Series Modules Catalog [https://support.industry.siemen- s.com/cs/ca/en/view/109747072].
  • Page 36 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Input Range: 36 to 72 6GK6015-0AL15-0AA0 (Standard) Terminal Type: Euro- 6GK6015-0AL15-0AA1 pean-style (Euroblock) (Conformal Coated) RUGGEDCOM RX1500PN PS HI Specifications Article Numbers Input Range: 88 to 300 6GK6015-0AL13-0AA0 VDC or 85 to 264 VAC (Standard) Terminal Type: Remov- 6GK6015-0AL13-0AA1...
  • Page 37 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Port Type: M12 (8-Pin, A-Coded, Controlled By- pass) Distance: 100 m (328 ft) Power Consumption: 4 RUGGEDCOM RX1500PN LM X CG04 Specifications Article Numbers Ports: 2 6GK6015-0AL20-0PH0 (Standard) Speed: 1000 Mbps 6GK6015-0AL20-0PH1 Interface: TX (Conformal Coated)
  • Page 38 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Speed: 100 Mbps 6GK6015-0AL20-0PD1 (Conformal Coated) Interface: TX Port Type: M12 (4-Pin, D-Coded) Distance: 100 m (328 ft) Power Consumption: 5 RUGGEDCOM RX1500PN LM 4TX04B Specifications Article Numbers Ports: 4 6GK6015-0AL20-0PG0 (Standard) Speed: 100 Mbps...
  • Page 39 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Distance: 2 km (1.2 mi) Power Consumption: 5 RUGGEDCOM RX1500PN LM FG03 Specifications Article Numbers Mode: SM 6GK6015-0AL20-0EC0 (Standard) Speed: 1000 Mbps 6GK6015-0AL20-0EC1 Interface: LX (Conformal Coated) Wavelength: 820 nm Ports: 4 Port Type: LC Distance: 10 km (6.2...
  • Page 40 All manuals and user guides at all-guides.com Modules 4.1 Available Modules RUGGEDCOM RX1500PN LM TC2 Specifications Article Numbers Interface: T1/E1 6GK6015-0AL20-0MC0 (Standard) Ports: 2 6GK6015-0AL20-0MC1 Port Type: RJ48C (Conformal Coated) Power Consumption: 3 RUGGEDCOM RX1500PN LM TC4 Specifications Article Numbers Interface: T1/E1 6GK6015-0AL20-0MD0 (Standard) Ports: 4...
  • Page 41 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Region: North Ameri- 6GK6015-0AL20-0WC1 ca (AT&T), European (Conformal Coated) Union, Australia Port Type: 50 Ω SMA Antennas: 2 x GSM/ EDGE/HSPA+, 2 x Re- ceive Diversity (Se- condary) SIM: Dual Mini-SIM (2FF) Power Consumption: 7 RUGGEDCOM RX1500PN LM W21...
  • Page 42 All manuals and user guides at all-guides.com Modules 4.1 Available Modules RUGGEDCOM RX1500PN LM W41 Specifications Article Numbers Services: 4G LTE/HS- 6GK6015-0AL20-0WG0 PA+/HSDPA/HSUPA/DC- (Standard) HSPA+/UMTS/WC- 6GK6015-0AL20-0WG1 DAM/EDGE/GPRS/GSM/ (Conformal Coated) GNSS Region: European Union Port Type: 50 Ω SMA Antennas: 1 x LTE Main, 1 x LTE MIMO, 1 x GPS SIM: Dual Mini-SIM (2FF)
  • Page 43 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Antennas: 1 x LTE Main, 1 x LTE MIMO, 1 x GPS SIM: Dual Mini-SIM (2FF) Power Consumption: 7 RUGGEDCOM APE Modules RUGGEDCOM RX1500PN LM APE1402 Specifications Article Numbers Operating System: De- 6GK6015-0AL20-0GB0 bian Linux®...
  • Page 44 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Operating System: De- 6GK6015-0AL20-0GD0 bian Linux® (Standard) Processor: Intel Atom 6GK6015-0AL20-0GD1 E660T 1.3 GHz, 512 KB (Conformal Coated) L2 Cache RAM: 2 GB DDR2, 800 MHz, 32-bit Disk: 16 GB SATA, Solid State Networking: Realtek RTL8111, RJ45 Gigabit...
  • Page 45 All manuals and user guides at all-guides.com Modules 4.1 Available Modules Networking: Realtek RTL8111, RJ45 Gigabit Ethernet Interface USB: 2 x USB 2.0 Video: Intel 4108 Graphics Processor, DVI- Power Consumption: 10 RUGGEDCOM RX1500PN LM APE1404CKP Specifications Article Numbers Operating System: 6GK6015-0AL20-0GF0 Check Point GAiA™...

  • Page 46: Installing/Removing Line Modules

    All manuals and user guides at all-guides.com Modules 4.2 Installing/Removing Line Modules Blank Modules RUGGEDCOM RX1500PN PS XXP Specifications Article Numbers — 6GK6015-0AL10-0AA0 (Standard) 6GK6015-0AL10-0AA1 (Conformal Coated) RUGGEDCOM RX1500PN LM Blank Specifications Article Numbers — 6GK6015-0AL20-0AA0 (Standard) 6GK6015-0AL20-0AA1 (Conformal Coated) Installing/Removing Line Modules Upon installing a new line module in the device, all features associated with the module are available in RUGGEDCOM RX1510.
  • Page 47 All manuals and user guides at all-guides.com Modules 4.2 Installing/Removing Line Modules Loosen the screws that secure the module. Pull the module from the chassis to disconnect it. Module Chassis Screw Figure 4.2 Removing a Module Install a new module or a blank module (to prevent the ingress of dust and dirt). [Optional] If necessary, install the device in the rack.

  • Page 48: Installing/Removing Power Modules

    All manuals and user guides at all-guides.com Modules 4.3 Installing/Removing Power Modules Insert the new module into the slot. Module Chassis Screw Figure 4.3 Installing a Module Tighten the screws to secure the module. [Optional] If necessary, install the device in the rack. Installing/Removing Power Modules The RUGGEDCOM RX1510 supports dual redundant power supply modules.
  • Page 49 All manuals and user guides at all-guides.com Modules 4.3 Installing/Removing Power Modules Figure 4.4 Power Modules CAUTION Contamination hazard – risk of equipment damage Prevent the ingress of water, dirts and other debris that may lead to premature equipment failure. Always make sure slots are not left empty. Note Power modules are hot swappable.
  • Page 50 All manuals and user guides at all-guides.com Modules 4.3 Installing/Removing Power Modules Disconnect the power supply wiring from the terminal block. Alternatively, for convenience, remove the terminal block with the wiring still connected and set it aside to be connected later to the new module. Install a new or blank module to prevent the ingress of dust and dirt.
  • Page 51 All manuals and user guides at all-guides.com Modules 4.3 Installing/Removing Power Modules RUGGEDCOM RX1510 Installation Manual, 12/2019, C79000-G8976-1055-16...

  • Page 52: Technical Specifications

    All manuals and user guides at all-guides.com Technical Specifications This section provides important technical specifications related to the device. Power Supply Specifications Note When determining cable lengths, make sure the minimum input voltage for the pow- er supply is provided at the power source. Input Range Maximum Power Sup-...

  • Page 53: Operating Environment

    All manuals and user guides at all-guides.com Technical Specifications 5.3 Operating Environment Operating Environment The RUGGEDCOM RX1510 is rated to operate under the following environmental conditions. NOTICE Temperature limits for select line modules may differ from that which can be with- stood by the RUGGEDCOM RX1510.
  • Page 54 All manuals and user guides at all-guides.com Technical Specifications 5.5 Dimension Drawings 237.74 Figure 5.1 Overall Dimensions RUGGEDCOM RX1510 Installation Manual, 12/2019, C79000-G8976-1055-16...
  • Page 55 All manuals and user guides at all-guides.com Technical Specifications 5.5 Dimension Drawings 286.5 152.4 276.4 78.2 Figure 5.2 Panel and Din Rail Mount Dimensions 162.5 151.4 19.7 Figure 5.3 Line Module Dimensions 162.5 151.8 40.6 Figure 5.4 Power Module Dimensions RUGGEDCOM RX1510 Installation Manual, 12/2019, C79000-G8976-1055-16...

  • Page 56: Certification

    UL 60950-1 Information Technology Equipment – Safety – Part 1: General Requirements) 6.1.2 European Union (EU) This device is declared by Siemens AG to comply with essential requirements and other relevant provisions of the following EU directives: • Directive 2014/30/EU...
  • Page 57 The device is marked with a CE marking and notified body number, and can be used throughout the European community. 0680 A copy of the CE Declaration of Conformity is available from Siemens AG. For contact information, refer to "Contacting Siemens (Page vii)".

  • Page 58: 6.1.3 Fcc

    CAN ICES-3 (A)/NMB-3 (A) 6.1.6 RoHS This device is declared by Siemens AG to meet the requirements of the following Ro- HS (Restriction of Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic equipment: •...

  • Page 59: 6.1.7 Other Approvals

    All manuals and user guides at all-guides.com Certification 6.1.7 Other Approvals 6.1.7 Other Approvals This device meets the requirements of the following additional standards: • IEEE 1613 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations IEC 61000-6-2 •...
  • Page 60 5 kV (Failsafe Relay output) DC Power Ports 5 kV AC Power Ports Siemens-specified severity levels EMC Immunity Type Tests for IEEE 1613 Note The RUGGEDCOM RX1510 meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper ports. Class 1 allows for temporary communica- tion loss, while Class 2 requires error-free and interrupted communications.
  • Page 61 All manuals and user guides at all-guides.com Certification 6.2 EMC and Environmental Type Tests Description Test Levels Enclosure Contact ± 8 kV Enclosure Air ± 15 kV Environmental Type Tests Test Description Test Levels Severity Levels IEC 60068-2-1 Cold Temperature Test Ad -40 °C (-40 °F), 16 Hours  ...
  • Page 62 All manuals and user guides at all-guides.com Further Information Siemens https://www.siemens.com Industry Online Support (service and support) https://support.industry.siemens.com Industry Mall https://mall.industry.siemens.com Siemens AG Digital Industry Process Automation Postfach 48 48 90026 NÜRNBERG GERMANY...

Table of Contents