Table of Contents
Advertisement
7 Mounting the KombiTool
3
16 mm
1
► Engage the combination wrench (3) on the
hexagon (4) at the base of tine (1).
3
► Use the combination wrench (3) to tighten
down the tine (1) firmly by turning it another
30° to 40°.
► Remove the combination wrench from the tine.
7
Mounting the KombiTool
2
0458-417-0121-B
4
2
1
1
► Push the lug (1) on the drive tube into the
slot (2) in the coupling sleeve as far as stop.
When correctly installed, the red line (3) (arrow
point) must be flush with the end of the coupling
sleeve.
► Tighten down the star knob (4) firmly.
7.1
Removing the KombiTool
► Reverse the above sequence to remove the
drive tube.
8
Fitting the Harness
The type and style of the harness, carrying ring
and carabiner (spring hook) depend on the mar‐
ket.
8.1
Shoulder Strap
► Put on the shoulder strap (1).
English
3
4
1
2
9
Advertisement
Table of Contents
