Table of Contents
Advertisement
5 Approved KombiEngines
► While combing the branches, turn the rakes to
and fro around the shaft's axis (C) if neces‐
sary.
► Have the whole tree even if there is very little
fruit left on it.
► Do not hold the unit in one spot for too long so
as not to damage leaves and branches unnec‐
essarily.
► Always shut off the engine before leaving the
unit unattended.
NOTICE
Operating the unit with broken and/or missing
tines (1) may result in damage to gearbox com‐
ponents or overload them. Therefore, do not con‐
tinue using a unit with broken and/or missing
tines.
Operating the unit with broken and/or missing
tines reduces the unit's harvesting performance.
► Always replace damaged tines – see chapter
on "Inspection and Maintenance by User".
5
Approved KombiEngines
Only use KombiEngines supplied or explicitly
approved by STIHL for use with the attachment.
This KombiTool may be operated only in combi‐
nation with the following KombiEngines:
1)
Only outside EU
0458-417-0121-B
STIHL KM 55 R, KM 56 R, KM 85 R
KM 94 R, KM 100 R, KM 110 R
KMA 135 R
WARNING
Loop-handled machines must be equipped with
a barrier bar.
6
Assembling the Unit
1
► Use the drive tube supplied with the unit.
► Pull the protective caps off the ends of the
shaft and keep them in a safe place for later
use – see "Storing the Machine"
The plug may come out of the drive tube when
you pull off the cap. Push it back into the shaft as
far as it will go.
English
1)
, KM 90 R,
1)
, KMA 130 R,
7
Advertisement
Table of Contents
