Mounting The Loop Handle - Stihl KM 85 R Instruction Manual

5 Mounting the Loop Handle

KombiTool
BF‑KM
FCB‑KM
FCS‑KM
SP‑KM
KB‑KM
KW-KM
5 Mounting the Loop Handle
A barrier bar is supplied with the machine. Attach
the barrier bar to the loop handle.
2
► Insert square nuts (1) in the barrier bar (2) –
the holes must line up
1)
The included barrier bar on the loop handle must be used - see also "Mounting the Loop Handle"
0458-462-8721-B
Intended use
Cultivator
Edger
Edger
Harvesters
Bristle brush
Sweeper drum assembly
1
1
4
5
6
► Insert the clamp (3) in the loop handle (4) and
position them together on the shaft (5)
► Position clamp (6)
► Position barrier bar (2) – note position!
► Line up the holes
► Insert bolts (7) in the holes – and screw them
into the barrier bar as far as possible
English
2
3
7
27