Philips FW-C28 Manual page 15

All manuals and user guides at all-guides.com
Automatic programming
1 Press TUNER (BAND).
2 Press PROGRAM for more than one
second.
™ The PROG flag starts flashing and
"AUTO" will be displayed.
™ The system will start searching for all
radio stations with RDS and then
followed by radio stations on FM,
MW and LW band respectively.
™ All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
™ The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™ The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç (on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
pg 01-24/C28/22-Eng 15
Manual programming
Tuning to Preset Radio
1 Press TUNER (BAND).
Stations
2 Press TUNER (BAND) to select the
• Press 4 or 3 to select the desired
desired waveband : FM, MW or LW.
preset number.
3 Press PROGRAM for less than one
™ The preset number, radio frequency,
second.
™ The PROG flag starts flashing.
™ The next available preset number will
be displayed for selection. Receiving RDS Radio Station
4 Press à or á to tune to the desired
Ç
frequency.
RDS (Radio Data System) is a broadcasting
• If you wish to store the radio station to
service that allows FM stations to send
another preset number, press 4 or 3 to
additional information along with the
select the desired preset number.
regular FM radio signal. This additional
5 Press PROGRAM again.
information can contain:
™ The PROG flag disappears and the
radio station will be stored.
• STATION NAME: The radio station
name is displayed.
• Repeat steps 3 – 5 to store other preset
• PROGRAM TYPE: The following
radio stations.
program types exist and can be received
Notes:
by your tuner: News, Affairs, Info, Sport,
– When 40 radio stations are stored and
Educate, Drama, Culture, Science,
you attempt to store another radio
Varied, Pop M, Rock M, M.O.R. (middle
station, the display will show
of the road music), Light M, Classics,
" PROGRAM FULL ". If you want to
Other M, No type.
change an existing preset number,
• RADIO TEXT (RT): text messages
repeat steps 3 – 5.
appear in the display.
– You can cancel manual programming by
pressing Ç (on the system only).
When you have tuned to a RDS station, the
– During programming, if no button is
RDS logo (Ç) and the radio station name
pressed within 20 seconds, the system
will appear on the display:
will exit program mode automatically.
• The display normally shows the radio
station name if available.
By repeatedly pressing RDS button you
can change the type of display
information:
™ The display shows in turn:
and waveband appear on the display.
STATION NAME ™ PROGRAM
TYPE ™ RADIO TEXT ™
TUNED FREQUENCY ™
STATION NAME ...
Note:
– When you press the RDS button and the
display shows " NO RDS ", it indicates
that either the tuned station is not
transmitting RDS signal or it is a non
RDS station.
RDS Clock
Some RDS station may be transmitting a
real clock time at an interval of every
minute.
Setting the time with RDS clock
1 Press CLOCK•TIMER.
™ "--:--" or current time appears on
the display.
2 Press CLOCK•TIMER once more to
enter clock setting mode.
™ "00:00" or current time starts
flashing.
3/7/00, 5:14 PM
TUNER
15
3139 116 19331 3139 116 19331