Eizo RadiForce G33 User Manual page 27

Eizo user's manual monochrome lcd monitor g33
Table of Contents

Advertisement

Problem
4.
Afterimages appear.
5.
The screen has defective pixels
(e.g. appears slightly light or dark).
6. Fingerprints remain on the screen.
7. The ScreenManager main menu
does not operate.
8.
The control panel does not operate.
CAL Switch mode does not operate.
9. The monitor turns off while in use.
10. The signal frequency does not
change after installing the "Monitor
information file" from the supplied
utility disk on a Windows
98/2000/Me/XP PC.
11. The USB function does not operate.
Points to check and possible solutions
Do you use the screen saver or timer (p.20)
when displaying the same image for extended
periods of time?
Afterimages are particular to LCD monitors.
Avoid displaying the same image for extended
periods of time.
This is due to the characteristics of the panel
itself and not the LCD product.
Leaving the screen white may solve the
problem
The adjustment lock is probably on. To unlock
it, first turn off the monitor. Touch the power
switch while touching the enter switch, and
then turn on the monitor again (see p. 19).
Make sure the control panel switches are not
wet or soiled. Lightly wipe the surface of the
control panel, and try touching the switches
again with dry hands.
Make sure not to wear gloves. Remove any
gloves, and try touching the switches again
with dry hands.
Make sure the control panel switches are not
wet or soiled. Lightly wipe the surface of the
control panel, and try touching the switches
again with dry hands.
Make sure not to wear gloves. Remove any
gloves, and try touching the switches again
with dry hands.
Make sure the air vents are not blocked.
Make sure high-temperature equipment is not
located nearby.
Use the graphics board's utility software to
change the input signal frequency.
Check that the USB cable is correctly
connected.
Check that the PC and OS are USB compliant.
(For verification of USB support, consult the
manufacturer of each system.)
Check the USB setting in the PC's BIOS. (For
details, refer to the PC user's manual.)
7. TROUBLESHOOTING
English
27

Advertisement

Table of Contents
loading

Table of Contents