Table of Contents
Advertisement
2.
Connect the signal cable to the DVI-D input connector on the rear of
the monitor and to the video output connector on the PC.
After connecting, secure the cable connectors with the attached screw-in fasteners.
Signal cable
FD-C39
Power cord
Signal Cable
Signal cable (FD-C39)
3.
Connect the power cord to the power connector on the rear of the
monitor.
4.
Thread the power cord and signal cable through the cable holder on
the rear of the monitor stand.
NOTE
• When threading the cables through the cable holder, lead them to the cable
entrance side and pinch the projection to open the cable entrance.
• It is recommended that some slack be left in the cables to allow for smooth
adjustment of the monitor stand and easy rotation between the portrait and
landscape positions.
Cable holder
Connector
Video output connector / DVI
PC
Exclusive graphics board
(See p.31)
Projection
Cable entrance
2. CABLE CONNECTIONS
English
13
Advertisement
Table of Contents
