Making Use Of Usb (Universal Serial Bus) - Eizo RadiForce G33 User Manual

5. MAKING USE OF USB
(Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a
USB compliant PC or another hub, the monitor functions as a hub to which the USB
compliant peripherals can be easily connected.
Required system environment
• PC equipped with USB ports or another USB hub connected to the USB compliant PC
• Windows 98/2000/Me/XP // Mac OS 8.5.1 or later
• USB Cable (MD-C93)
NOTE
• The USB hub function may not work properly depending on the PC, OS or
peripherals. Please consult the manufacturer of each device about the USB
support.
• When the monitor is not on, the peripherals connected to the downstream ports will
not operate.
• Even if the monitor is in a power saving mode, the devices connected to the
monitor's USB ports (both the upstream and the downstream) will function.
• The followings are procedures for the Windows 98/Me/2000/XP and Mac OS.
Connecting to the USB HUB
1.
Connect the monitor to the PC with the signal cable (see p.12) first,
then turn on the PC.
2.
Connect the upstream port of the monitor to the downstream port of
the USB compliant PC or another hub by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
Upstream port:
Connect the USB compliant PC
or another hub using the USB
cable.
Upstream Ports
To Downstream Ports of
the PC or Another Hub

5. MAKING USE OF USB (Universal Serial Bus)

English
23