Related Manuals for Eizo RadiForce G33
Summary of Contents for Eizo RadiForce G33
- Page 1 User’s Manual Monochrome LCD Monitor It shall be assured that the final system is in compliance to IEC60601-1-1 requirements.
-
Page 2: Safety Symbols
• This is a monitor intended for use in a medical image system. Copyright© 2005 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. -
Page 3: Table Of Contents
2-1. Before Connecting ...12 2-2. Cable Connection ...12 3. MENUS & FUNCTIONS ... 15 3-1. ScreenManager ...15 3-2. CAL Switch Function...17 3-3. Other Useful Functions ...18 4. ADJUSTMENTS & SETTINGS ... 21 4-1. Brightness Adjustment ...21 4-2. Image Adjustments ...21 4-3. -
Page 4: Precautions
English PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. •... - Page 5 WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
- Page 6 English WARNING To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock.
- Page 7 WARNING Do not touch a damaged LCD panel directly with bare hands. The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
-
Page 8: Lcd Panel
English LCD Panel The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. -
Page 9: Introduction
• USB (Universal Serial Bus) hub support (see p. 23) • Utility software “ScreenManager Pro for Medical”, which enables control of the monitor from a Windows PC with a mouse or keyboard (refer to the EIZO LCD Utility Disk). • Monitor stand adjustable for different heights •... -
Page 10: Controls & Connectors
English 1-3. Controls & Connectors Front... - Page 11 English Side / Rear...
-
Page 12: Cable Connections
English 2. CABLE CONNECTIONS 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings resolution (see p.33) and frequency in accordance with the charts below. NOTE • When your computer and display support VESA DDC, the appropriate resolution and the refresh rate are set just by plugging your display into the computer without any manual settings. - Page 13 Connect the signal cable to the DVI-D input connector on the rear of the monitor and to the video output connector on the PC. After connecting, secure the cable connectors with the attached screw-in fasteners. Signal cable FD-C39 Power cord Signal Cable Signal cable (FD-C39) Video output connector / DVI...
- Page 14 The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Turn on the monitor's power by touching the power switch. The monitor’s power indicator will light up green. Turn on the PC’s power.
-
Page 15: Menus & Functions
(1) Select the desired submenu icon with the directing switches and touch the enter switch. (2) Select the desired setting icon with the directing switches and touch the enter switch. (3) Make any required adjustments with the directing switches. [Exiting the ScreenManager] (1) To return to the main menu, select the <Return>... - Page 16 English, German, French, Spanish, Italian, Swedish and Japanese The display time of the CAL Switch menu can be adjusted. Due to factory inspection, the usage time may not be “0 hours” at time of shipping. 3. MENUS & FUNCTIONS Sub menu See 3-3.
-
Page 17: Cal Switch Function
[Closing the CAL Switch menu] (1) Touch the enter switch. NOTE • The ScreenManager menu and CAL Switch menu cannot be displayed at the same time. • When switching between modes, the monitor can be set to display only the desired modes, skipping any unnecessary modes (see p.19). -
Page 18: Other Useful Functions
(1) Shut down the computer if it is running. Also, turn off the monitor by touching the power switch on the control panel. (2) Turn off the monitor power. (3) Touch the power switch while touching the mode switch on the conrtol panel. The <Orientation> menu appears. Mode Switch (4) Select the menu option according to your monitor orientation and touch the enter switch. -
Page 19: Mode Preset
Mode Preset When CAL Switch mode is selected, the computer can be forced to display only specified modes. Use this function when the display modes are restricted or when the display should not be changed needlessly. [How to set] (1) Select <Mode Preset> in the ScreenManager <Setup> menu. -
Page 20: Off Timer
Last 15 min. in “On period” “On period” expired By touching the power switch on the control panel during the Advance Notice period, the On Period can be reset to 90 minutes. Resetting can be performed an unlimited number of times. -
Page 21: Adjustments & Settings
[Procedure] (1) Select <Brightness> in the ScreenManager <Mode> menu. (2) Make adjustments with the Left and Right directing switches. The Left directing switch makes the screen darker, and the Right directing switch makes it brighter. NOTE • Selecting <Reset> in the <Mode> menu resets the brightness of the selected CAL Switch mode to the factory default setting. - Page 22 English [Procedure] (1) Set the PC's power saving settings. (2) Select “DVI DMPM” in the <PowerManager> menu. [Power saving system] Power saving / Off mode [Power Resumption Procedure] • Click the mouse or press a key on the keyboard to return to a normal screen. 4.
-
Page 23: Making Use Of Usb (Universal Serial Bus)
5. MAKING USE OF USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment •... - Page 24 ScreenManager Pro for Medical (for Windows) For further details about the “ScreenManager Pro for Medical (for Windows)”, refer to the EIZO LCD Utility Disk. 5. MAKING USE OF USB (Universal Serial Bus) Monitor Ke y board...
-
Page 25: Attaching An Arm
6. ATTACHING AN ARM The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the LCD monitor. NOTE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting. -
Page 26: Troubleshooting
English 7. TROUBLESHOOTING If a problem persists even after applying the remedies suggested below, contact an EIZO dealer. • No picture problems → See No.1 ~ No.2 • Imaging problems • Other problems • USB problems Problem 1. No picture •... - Page 27 The adjustment lock is probably on. To unlock it, first turn off the monitor. Touch the power switch while touching the enter switch, and then turn on the monitor again (see p. 19). Make sure the control panel switches are not wet or soiled.
- Page 28 Try connecting the peripheral to another USB downstream port. If the problem is solved by doing this, contact an EIZO dealer. (For details, refer to the manual of the PC.) Try executing the following method. - Restarting the PC...
-
Page 29: Cleaning
8. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. -
Page 30: Specifications
English 9. SPECIFICATIONS LCD Panel Viewing Angle Panel Protector Dot Pitch Horizontal Scan Frequency Vertical Scan Frequency Resolution Dot Clock (Max.) Gray Scale Brightness (Recommended) Display Area Power Supply Power Consumption Input Connector Input Signal Plug & Play Dimensions With stand without stand Weight With stand... - Page 31 8bit, 10bit, and 12bit monochrome signals supported • RealVision “VREngine/SMD-3PCI” 8bit and 10bit monochrome signals supported • Matrox “MED3mp-PPP” 8bit monochrome signals supported • RealVision “VREngine/MD3W” EIZO “RadiCS GX2” Ver.2.00 or later EIZO “RadiNET Pro” Ver.2.00 or later English mm (inches) 168 (6.6) SWIVEL 9. SPECIFICATIONS...
-
Page 32: Pin Assignment
English Pin Assignment DVI-D Connector 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 19 20 21 Pin No. TMDS Data2/4 Shield o1d0 0 e 4228>44.63998 .527011eS252.48198 493.881eS252.48198 493G0.82Tm-re f0.oc>4 f 0.8 g 001697919j 8.9.(o1d04904999998 7292.85934 49338n8 309.593 f 0. 8.99994999998 7292.85934 49338n8 309.593 f 0. 8011eS252.48198 4939623 0 eD9.(o1d049eS252.80)Tju93.8866 3050 13N898 7292.85934 49338n8 309.593 f 0. 8)Tj 8.9.(o1d764 >>BDC 0 g f 0. 8.999ed0 0 e 42229 0 0 8 0 e 422.041 qe4683 >44.6399011o1d2t8 309.593 f 0. 8.91 q6886.56 06296098 0 06296090 13N898 7292.897>44.63998 .527011eS251d76292.85934 4933a0186296012998960g B88f 18M83 >. 960g B88f 4.20703 33.. f cN83 >3488061 0 g BT c >. 960g B88f 4.20703 33..668 f 18ha3 98493.c4590 ha3F1 f 1934 866642 504.28p 0 0 8.99998 457.46228 493.98 80 1.6228 493.98 80 1.6228 4930.lg B.74226h1 f 1 341.57 0 e2998960g B88f 18M83 >. 96930.lg 6h1 f 1 341.57 0 90 4178 493.8866 Tm 7>. 960g B88f 4.20703 33647 1 341.011eS252.48198 493.881eS252.48 371.63998*7011eS2517N 95995438.93N83 >44.63998 56 0.3 f /P <</MCID 0)T3877 48.3008g29 0 0 8.r748888666 Tm (o19877 P <</MCID29 0 0 /P < 50.2 )1398 7292.85 998* ocNC*0.3477 48.3008g29 0 0 8.99998 426.4k sh479377 48.3008g29 0 0 8.99998 426.44629 0 0 8.99998 309.5935106178 493.8866 Tm (oc)Tj 8.988o504.06 5re f 0.40.4i3.38 re f /P <</MCID 44 >>BD(oc)Tj 8.988o5998493.c 22 23 24... -
Page 33: Glossary
The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO G33 display panel consists of 1536 horizontal pixels and 2048 vertical pixels. At a resolution of 1536 x 2048, all pixels are displayed as a full screen. -
Page 34: Fcc Declaration Of Conformity
Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (enclosed) This Class B digital apparatus complies with Canadian ICES-003. - Page 35 DE BRAN CHE SWICO. http://www.swico.ch Recycling Information for customers in USA: All recycling information is placed in the EIZO Nanao Technologies, Inc’s website. http://www.eizo.com/contact/index.html Återvinnings information för kunder i Sverige: All information om återvinning finns på Eizo Europe AB:s hemsida:...