Dual XDMA6630 Installation & Owner's Manual page 8

XDMA6630 OPERATION
General Operation
Escape Press ESC to exit any menu adjustment mode.
Audio Press AUDIO/MENU momentarily to select between Bass,
Treble, Balance, Fader, EQ, Subwoofer* and Source Volume
Level.
BASS TREBLE BALANCE FADER EQ SUBWOOFER* SOURCE LEVEL
Bass Press AUDIO/MENU until BASS appears, then rotate
the volume knob left/right to adjust (-6 minimum / +6
maximum).
Treble Press AUDIO/MENU until TREBLE appears, then rotate
the volume knob left/right to adjust (-6 minimum / +6
maximum).
Note: Bass and Treble settings are saved as the USER EQ
setting.
Note: Bass and Treble settings are retained for each mode
individually.
Balance Press AUDIO/MENU until BALANCE appears, then rotate
the volume knob left/right to adjust (BALANCE LEFT 12 to
BALANCE RIGHT 12). "BALANCE EVEN" represents equal
balance.
Fader Press AUDIO/MENU until FADER appears, then rotate the
volume knob left/right to adjust (FADER FRONT 12 to FADER
REAR 12). "FADER EVEN" represents equal fader.
EQ
Press AUDIO/MENU until EQ appears. Rotate the volume
knob left/right to select between FLAT (default), POP, JAZZ,
CLASSIC, BEAT, ROCK and USER equalization curves. Press
SELECT to confirm. Any manual adjustment to the Bass or
Treble settings are automatically saved as USER.
Subwoofer Press AUDIO/MENU until SUBWFR appears, then press
SELECT to confirm. Rotate the volume knob left/right to
adjust (0-12). Adjusting levels to 0 turns the subwoofer off.
Source Volume Level
The source volume level control allows a gain adjustment
for each audio source: AM, FM, CD, AUX, USB, operation of
iPod and Bluetooth. Set the source volume level for each
mode, depending on the relative volume of each audio
source.
To set the source volume level, press AUDIO/MENU until
SRC LEVEL appears. After one second, the current mode
will appear on the display. Turn the volume knob to adjust
the audio level of the current source (-6 minimum/+6
maximum).
Note: Only the current mode will be available for
adjustment. To adjust another mode of operation, press
MODE until the desired mode is selected, then set the
source volume level for that mode.
8