Quick Setup; Insert The Batteries; Making The Remote Work With Your Receiver - Dish Network 167821 User Manual

Insert the Batteries

1
A
B
Pull the
remote
battery
cover off.
Making the Remote Work
With Your Receiver
1
Turn your receiver and
TV on, and press SYSTEM
INFO on the front
of the receiver.
3
RECORD
Press RECORD on
your remote. The remote
address probably
changes on the screen.

Quick Setup

1
2
A
B
Insert 4 AAA
batteries making
sure to match the
plus (+) ends with
the plus markings
on the battery case.
2
Use the remote to select
Done from System Info to
confirm that your remote
S-1
Replace
2
Confirm that you
see the System
Info screen.
4
operates your receiver.
If this is not working,
go back to step
3
A
B
the
remote
battery
cover.
.
1