Dish Network 167821 User Manual page 31

What's
What's Wrong
Happening
Your picture • You have
is snowy (or accidentally
blue or changed the
black). channel on your
TV.
Your remote • The remote
control isn't control is in the
working wrong mode.
• You might be
using the wrong
remote control
(TV1 or TV2).
• Your batteries
are worn out.
When you
• Maybe you have
press the not set up the
remote remote control.
control Mute
or Volume
button,
nothing
• Maybe you're
happens.
trying to control
TV volume but
you set up the
remote to
control a tuner
or amplifier in
AUX mode.
Your PIP • Your receiver
(Picture-In- doesn't use PIP.
Picture)
button isn't
working.
What You Can Do
• Make sure your TV (and VCR, if
connected) is tuned to the correct
channel. Also try using the
Recover button as described on
page S-3, If You Lose Your Picture
(How to Use the Recover Button).
• Make sure the remote control is in
the correct mode. For example, if
you want to use the satellite
receiver, put the remote control in
mode (see Remote Control
SAT
Modes on page 1).
• Make sure you are using the
correct remote control (TV1 or
TV2) for your locations (multi-
room receivers only).
• Change the batteries as described
on page S-1 in Insert the Batteries.
• See Program the Remote to
Control Your TV on page S-2 at
the beginning of this guide and
Programming for Other
Equipment on page 2.
• Set up the remote to control either
TV volume or tuner/amplifier
volume, whichever you want. See
page 7.
• Upgrade to a receiver with this
feature.
21