Table of Contents
Advertisement
OPERATING
FIREPLACE
Variable Manually
Controlled Model
Continued
102665
VARIABLE MANUAL CONTROL OPERATION
The variable control valve can be set to any heat setting and flame height desired, by
simply turning the control knob until that setting is attained. Even the lowest setting
provides realistic flames and glowing embers from two burners. Selecting higher
settings produces greater heat output. This results in increased heating comfort.
Do not operate heater between pilot and high positions.
Do not try to adjust heating levels by using the manual shutoff valve.
TO TURN OFF GAS TO APPLIANCE
Shutting Off Fireplace
1. Turn control knob clockwise
2. Slightly depress control knob and turn clockwise
3. Slightly depress control knob and turn clockwise
Shutting Off Burners Only (pilot stays lit)
1. Turn control knob clockwise
2. Press in and turn clockwise
MANUAL LIGHTING PROCEDURE
1. Follow steps 1 through 5 under Lighting Instructions, page 24.
2. Depress control knob and light pilot with match.
3. Keep control knob pressed in for 30 seconds after lighting pilot. After 30
seconds, release control knob. Now follow step 8, above.
WARNING
WARNING ICON
G 001
CAUTION
WARNING ICON
G 001
to the HIGH position.
Clockwise
Clockwise
Clockwise
to the HIGH position.
Clockwise
to the PILOT position.
Clockwise
to the PILOT position.
to the OFF position.
25
Advertisement
Table of Contents
