Changing The Backlight Settings; Customizing The Hot Keys; Changing The Units Of Measure; Clock - Garmin FORERUNNER 935 Owner's Manual

Changing the Backlight Settings

1
From the watch face, hold
2
Select Settings > System > Backlight.
3
Select an option:
• Select During Activity.
• Select Not During Activity.
4
Select an option:
• Select Keys to turn on the backlight for key presses.
• Select Alerts to turn on the backlight for alerts.
• Select Gesture to turn on the backlight by raising and
turning your arm to look at your wrist.
• Select Timeout to set the length of time before the
backlight turns off.
• Select Brightness to set the brightness level of the
backlight.

Customizing the Hot Keys

You can customize the hold function of individual keys and
combinations of keys.
1
From the watch face, hold
2
Select Settings > System > Hot Keys.
3
Select a key or combination of keys to customize.
4
Select a function.

Changing the Units of Measure

You can customize units of measure for distance, pace and
speed, elevation, weight, height, and temperature.
1
From the watch face. hold
2
Select Settings > System > Units.
3
Select a measurement type.
4
Select a unit of measure.

Clock

Setting the Time Manually

1
From the watch face, hold
2
Select Settings > System > Time > Set Time > Manual.
3
Select Time, and enter the time of day.

Setting an Alarm

You can set up to ten separate alarms. You can set each alarm
to sound once or to repeat regularly.
1
From the watch face, hold
2
Select Clock > Alarm Clock > Add Alarm.
3
Select Time, and enter the alarm time.
4
Select Repeat, and select when the alarm should repeat
(optional).
5
Select Sounds, and select a type of notification (optional).
6
Select Backlight > On to turn on the backlight with the alarm.
7
Select Label, and select a description for the alarm
(optional).

Deleting an Alarm

1
From the watch face, hold
2
Select Clock > Alarm Clock.
3
Select an alarm.
4
Select Delete.

Starting the Countdown Timer

1
From the watch face, hold
2
Select Clock > Timer.
3
Enter the time.
Customizing Your Device
.
.
.
.
.
.
.
4
If necessary, select Restart > On to automatically restart the
timer after it expires.
5 If necessary, select Sounds, and select a type of notification.
6
Select Start Timer.

Using the Stopwatch

1
From any screen, hold LIGHT.
2
Select Stopwatch.
NOTE: You may need to add this item to the controls menu
(Customizing the Controls Menu, page
3 Select START to start the timer.
4
Select to restart the lap timer
The total stopwatch time
5
Select START to stop both timers.
6
Select an option.
7
Save the recorded time as an activity in your history
(optional).

Setting Clock Alerts

1
From the watch face, hold
2
Select Clock > Alerts.
3
Select an option:
• To set an alert to sound a specific number of minutes or
hours before the actual sunset occurs, select Til Sunset >
Status > On, select Time, and enter the time.
• To set an alert to sound a specific number of minutes or
hours before the actual sunrise occurs, select Til Sunrise
> Status > On, select Time, and enter the time.
• To set an alert to sound every hour, select Hourly > On.

Syncing the Time with GPS

Each time you turn on the device and acquire satellites, the
device automatically detects your time zones and the current
time of day. You can also manually sync the time with GPS
when you change time zones, and to update for daylight saving
time.
1 From the watch face, hold
2
Select Clock > Sync With GPS.
3 Wait while the device locates satellites
Signals, page 30).

VIRB Remote

The VIRB remote function allows you to control your VIRB
action camera using your device. Go to
to purchase a VIRB action camera.

Controlling a VIRB Action Camera

Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information. You must also set the
VIRB widget to be shown in the widget loop
Widget Loop, page 23).
1
Turn on your VIRB camera.
2
On your Forerunner device, select UP or DOWN from the
watch face to view the VIRB widget.
3
Wait while the device connects to your VIRB camera.
17).
.
continues running.
.
.
(Acquiring Satellite
www.garmin.com/VIRB
(Customizing the
27