Advertisement
3-9 F/W Update Procedure
Tools:
AC Adapter
SD Card with Update Firmware
Procedure:
1.
Install the SD card with firmware update program into camera. Close the card cover.
2.
Attach AC Adapter to camera. Keep pressing the ERASE button and then slide the Power switch to power on the
camera.
3.
The camera displays update information on the TFT LCD as shown in figure 3.9.1
4.
The update procedure will be finished when it displays COMPLETED message on LCD shown as figure 3.9.2. Turn off
the camera and remove the SD Card.
Fig. 3.9.1
5.
Turn the mode dial to SETUP mode and slide the Power switch to power on the camera.
6.
Press the UP/DOWN button to select the item LANGUAGE. Then press the SELF-TIMER button and SHUTTER
button together to enter the area code menu as shown in figure 3.9.3.
7.
Press the UP/DOWN button to select the correct area then press ENTER.
8.
It displays the version information as shown in figure 3.9.4. Check the relative information and make sure the software
version is updated.
Area Code
A
North America
J
E
(U)
C
Attention: The firmware will be damage if the power supply is stopped while proceeding update.
Fig. 3.9.3
Place
OSD Language
English
Japan
Japanese
Europe
English
UK
English
China
Simplified Chinese
Fig. 3.9.2
Video Output
NTSC
NTSC
PAL
PAL
PAL
Fig. 3.9.4
34
The Time & Date format
MM.DD.YYYY
YYYY.MM.DD
DD.MM.YYYY
DD.MM.YYYY
YYYY.MM.DD
Advertisement
