Advertisement
3-8 Focus Calibration Procedure
Tools:
AC Adapter
SD Card with Calibration Firmware
Collimator Lens ; f = 450mm
Chart: Supplied as PDF file "TEST_CHART.pdf" used by printing on A3 size.
Test distance : Between collimator lens and chart is 450mm.
(Please confirm collimator lens manual so that the distance of camera and chart may be infinity.)
Procedure:
1.
Install the SD Card with calibration firmware into camera. Close the card cover.
2.
Attach AC Adapter to camera. Keep pressing the MENU button and slide the Power switch to power on the camera.
3.
"ADJ MENU" is displayed on LCD screen as shown in figure 3.8.1.
4.
Press the UP/DOWN button to select the item FOCUS. Then press the RIGHT button to enter FOCUS menu. The Lens
will move and FOCUS MENU is displayed on LCD as shown in figure 3.8.2.
5.
Adjust the position of the collimator lens so that the distance of a camera and chart may be infinity. Put the camera into
front of the collimator lens within 50mm. Then press OK button to proceed with the FOCUS adjustment automatically.
If the adjustment is OK, the TFT LCD will display SUCCESS as shown in figure 3.8.3. Press the LEFT button to return.
If the LCD displays FAILURE shown as figure 3.8.4, the camera is NG.
Fig. 3.8.1
Fig. 3.8.3
Fig. 3.8.2
Fig. 3.8.4
33
Advertisement
