Manual Configuration (3G Mode); 3G Internet Connection - D-Link DIR-412 User Manual

Section 3 - Configuration
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to configure your
3G configuration parameters.
Auto-config:
Select whether or not to automatically configure your
3G Internet connection parameter.
Country:
Select your country from the drop-down menu.
ISP:
Select your Internet Service Provider (ISP) from the
drop-down menu.
User Name:
Enter the user name for your 3G Internet connection.
Password:
Enter the password for your 3G Internet connection.
Dial Number:
Enter the dial number for your 3G service provider.
APN:
Enter the Access Point Name (APN) for your 3G service
provider.
Authentication Protocol:
Select the protocol from the drop-down menu.
SIM Card PIN Code:
Enter your PIN.
PIN Status:
Displays the PIN detection status.
Maximum Idle Time:
Enter the maximum amount of time the Internet connection should be maintained during inactivity. To disable this feature,
enable the Always-on reconnect mode.
MTU:
Maximum Transmission Unit. You may need to change the MTU for optimal performance with your specific ISP. The default
is 1500.
D-Link DIR-412 User Manual

Manual Configuration (3G Mode)

3G Internet Connection

15