Network Filters - D-Link DIR-412 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Configure MAC
Select Turn MAC Filtering Off, Allow MAC addresses
Filtering:
listed below, or Deny MAC addresses listed below from
the drop-down menu.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to
the Networking Basics section in this manual.
DHCP Client:
Select a DHCP client from the drop-down menu and click
<< to copy the MAC Address from the DHCP client.
Schedule:
Select a schedule for when the Network Filter will be
enabled. The user can click the New Schedule button
to bring up the "Schedule Webpage" to configure a new
schedule.
D-Link DIR-412 User Manual

Network Filters

47