Table of Contents
Advertisement
8
SECTION 00 - MAINTENANCE
CHAPTER 1
CAB IDENTIFICATION PLATES, Figure 7
The cab serial number and details are printed on the
certification plate's on the rear left hand window. Re-
cord the serial number below for quick reference.
Serial No.
Date Code
- - - - - - - -
7
IMPORTANT ECOLOGICAL CONSIDERATIONS
The following are recommendations which may be of
oils, brake fluids, etc. Do not mix drained brake
assistance:
fluids or fuels with lubricants. Store them safely
•
Become acquainted with and ensure that you un-
until they can be disposed of in a proper way to
derstand the relative legislation applicable to
comply with local legislation and available re-
your country.
sources.
•
Where no legislation exists, obtain information
5. Modern coolant mixtures, i.e. antifreeze and
from suppliers of oils, fuels, antifreeze, cleaning
other additives, should be replaced every two
agents, etc., with regard to their effect on man
years. They should not be allowed to get into the
and nature and how to safely store, use and dis-
soil but should be collected and disposed of safe-
pose of these substances.
ly.
HELPFUL HINTS
1. Avoid filling tanks using jerry cans or inappropri-
ate pressurised fuel delivery systems which may
cause considerable spillage.
2. In general, avoid skin contact with all fuels, oils,
acids, solvents, etc. Most of them contain sub-
stances which can be harmful to your health.
3. Modern oils contain additives. Do not burn con-
taminated fuels and/or waste oils in ordinary
heating systems.
4. Avoid spillage when draining off used engine
coolant mixtures, engine, gearbox and hydraulic
604.56.061.00
09/2000
6. Do not open the Air-Conditioning system your-
self.
It
may contain gasses which should not be re-
leased into the atmosphere. Your air conditioning
specialist has a special equipment for discharging
and charging the system.
7. Repair any leaks or defects in the engine cooling
or hydraulic system immediately.
8. Do not increase the pressure in a pressurised cir-
cuit as this may lead to a catastrophic failure of
the system components.
9. Protect hoses during welding as penetrating
weld splatter may burn a hole or weaken them,
causing the loss of oils, coolant, etc.
LB 75-115
Hide quick links:
Advertisement
Table of Contents
