Folding The Handle - Toro 21848 Operator's Manual

Folding the Handle

WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the electric-start button
Figure 20
2. Hold the handle while disengaging the handle
locks to avoid pinching your hands.
3. Rotate the entire handle forward
Important:
Route the cables to the outside
of the handle knobs as you fold the upper
handle.
Figure 21
4. Loosen the handle knobs.
5. Rotate the upper portion of the handle back
toward the motor; refer to
(Figure 20).
g251571
(Figure 21).
g335758
Figure 22.
1. Handle knobs
6. To unfold the handle, refer to
Handle (page
19
Figure 22
2 Unfolding the
9).
g335780