Download Print this page

Varytec VP-m5 Quick Start Manual page 2

Mobile video bilight

Advertisement

VP-m5 Mobile Video BiLight
Using the product
1. First the internal battery must be charged. To do this, connect the device to a
suitable voltage source (not supplied) via its USB-C port e.
2. Place the device with its connection w on the hot shoe of the camera to be used.
3. Press the
switch t to switch on the device.
4. Set the desired lighting intensity with the brightness control r.
Technical specifications
Light source
Light source properties
Optical properties
Input connections
Power consumption
Power supply
Battery / rechargeable battery
Protection class
Mounting options
Mounting options (W × H × D)
Weight
Ambient conditions
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected
for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal firm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your
local waste disposal facility.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
66 × SMD-LED (33 × warm white, 33 × cold white)
Colour temperature
2550 - 6140 K, steplessly adjustable
Colour rendering index CRI
>95
Beam angle
120°
Light output
800 lm
Charging port
USB-C
LEDs
5 W
USB (5 V  )
Battery type
Lithium-Ion
Voltage
3.7 V
Capacity
2000 mAh
Charging time
3.5 h
Operating time
2 - 10 h (depending on brightness setting)
IP20
camera hot shoe
92 mm × 21 mm × 78 mm
110 g
Temperature range
0 °C - 40 °C
Relative humidity
20 - 80 % (non-condensing)
5. Set the desired colour temperature between 2600 - 5700 K with the colour
temperature control y.
6. Observe the battery charge level indicator q to estimate the remaining operat-
ing time. If the video light goes out, the internal battery must be recharged.
7. Press the
switch t to switch off the device.
Batteries must not be disposed of as domestic waste or thrown into fire. Dis-
pose of batteries according to national or local regulations regarding hazard-
ous waste. Dispose of empty batteries at appropriate collection sites. Dispose
lithium batteries only in discharged condition. Remove replaceable lithium
batteries from the device before disposal. Protect used lithium batteries from
short circuits, for example by covering the poles with adhesive tape. Perma-
nently installed lithium batteries must be disposed of together with the device.
Please inquire about a suitable acceptance point.
EN
DocID: 522506_25.02.2022

Advertisement

loading