In Case Of Difficulty - Clarion DRZ 9255 Owner's Manual

High-fidelity am/fm cd player
Hide thumbs Also See for DRZ 9255:
Table of Contents

Advertisement

TV Operations
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press the [BAND] button and select the
desired TV band (TV1 or TV2).
2. Press and hold the [P/A] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Note:
• Do not press and hold the [P/A] button for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Setting the TV diversity (TV DIVER)
This function automatically switches to reception
by a good-reception antenna during reception of
TV broadcasts (when a TV tuner is connected).
* The factory default setting is "ON". Set again to
"OFF" when the TV diversity antenna is not in use.
1. Press the [ADJ] button.
2. Press the [
] or [
] button to select "TV
DIVER".
3. Press the [ ] or [ ] button to select "ON" or
"OFF".
4. Press the [ADJ] button to return to the
previous mode.
28
DRZ9255

8. IN CASE OF DIFFICULTY

Problem
Cause
Power does not turn
Fuse is blown.
on.
(No sound is pro-
duced.)
Incorrect wiring.
No sound output
Power antenna lead is short-
when operating the
ed to ground or excessive
unit with amplifiers or
current is required for re-
power antenna attach-
mote controlling on the am-
ed.
plifiers or power antenna.
Nothing happens
The microprocessor has
when buttons are
malfunctioned due to noise,
pressed.
etc.
Display is not accu-
rate.
Compact disc cannot
Another compact disc is al-
be loaded.
ready loaded.
Sound skips or is
Compact disc is dirty.
noisy.
Compact disc is heavily
scratched or warped.
Sound is bad directly
Water droplets may form on
after power is turned
the internal lens when the
on.
car is parked in a humid
place.
The CD is automati-
A CD is loaded upside-
cally ejected.
down inside the CD deck
and does not play.
Measure
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
Consult your store of purchase.
1. Turn the unit off.
2. Remove all wires attached to the power
antenna lead. Check each wire for a possible
short to ground using an ohm meter.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the
amplifiers turn off before all wires are
attached, use an external relay to provide
remote-on voltage (excessive current
required).
Press the reset button for
about 2 seconds with a
thin rod.
Reset button
Eject the compact disc before loading the new
one.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no scratches.
Let dry for about 1 hour with the power on.
Eject the disc then reload it properly.
29
DRZ9255

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents