Accessory; Programmable Key - Fortinet FON-80 Series User Manual

Configuration overview

Accessory

The Accessory section configures the following settings:
Item
Headset Priority
EHS Headset
USB Headset
Bluetooth
Connecting a Bluetooth headset
1. Go to Setting > Accessory > Bluetooth.
2. Ensure Bluetooth is set to Enabled.
3. Press the Scan soft key.
4. Select the discovered Bluetooth device and press the Pair soft key.
Disconnecting a Bluetooth headset
1. Go to Setting > Accessory > Bluetooth.
2. Select the connected Bluetooth device.
3. Press the Disconnect soft key.

Programmable key

Configure the programmable keys that are on the sides of the screen using the following settings:
Item
Programmable Key
Type
FortiFone FON-x80 Series 3.0.9 User Guide
Fortinet Technologies Inc.
Description
Configures what happens when the headset key is pressed or if the Answer soft
key is pressed while the handset is onhook:
Switch – pressing headset key will switch between headset and other audio
l
options.
Headset Priority – pressing the Answer soft key will activate the headset
l
instead of speaker.
Enables EHS (Electronic Hookswitch), for use with compatible headsets.
Enables headset support through the USB port.
Enables and scans for Bluetooth headsets.
To use a Bluetooth headset, the FON-380 requires a CSR 4.0 USB Bluetooth dongle. The
FON-480 can support a Bluetooth headset without the addition of a dongle.
Description
Select the programmable key to configure.
Select the action to take when the key is pressed:
None – nothing will happen when key is pressed.
l
Park – ongoing call will be parked.
l
19