Optional Products; Stamp Unit - Canon DR-7080C Instruction Manual

Optional Products

The following options can be purchased and used on the DR-7080C, if they are
necessary. Contact your sales representative.

Stamp Unit

The stamp unit affixes a "scanned" stamp on document pages that are scanned
using the feeder. The application can be used to turn stamping on or off.
The stamp is a circle that has a diameter of about 3 mm, with a cross in the
center. It is stamped on the scanned side of the document page, about 7 mm from
the trailing edge of the document page.
The stamp pattern is fixed and cannot be changed.
In the case of duplex scanning, both sides of the document page are stamped.
Note
The cross in the center of the stamp rotates during stamping.
Stamp
Position

1.5 Optional Products

Stamp
Position
21