Gigaset 5040 Manual page 55

Setting the flash time for the Recall key
º195
Hold down the Set key. Initiate function.
0 4
... Enter desired flash code:
0: 90 ms (default setting);
1: 120 ms; 2: 270 ms;
º
3: 375 ms; 4: 600 ms.
Hold down the Set key.
Using functions for additional services
of public telephone systems
If you want to use services that are to be triggered with
the Recall key, make sure beforehand that the correct
flash time is set for the key.
Recall key (in public telephone systems)
In public telephone systems, this key is required to use
certain additional services.
The appropriate flash time for the specific country must
be set before using the Recall key can be used:
◆
Belgium, Netherlands, Switzerland: 120 ms
(access code 1)
◆
France, Luxembourg, Portugal, Germany, Greece: 270
ms (access code 2)
◆
other European countries: 90 ms (access code 0).
Using Calling Line Identification (CLI)
Under the following conditions, the phone numbers of
incoming calls are
(a) shown on the display and
(b) automatically saved in a calls list:
◆
Both your network provider and the caller's network
provider must offer CLI.
◆
Both you and the caller must have requested this
service (if necessary) from your respective network
providers.
If these conditions are met, but a caller has suppressed
CLI before making the call, you will see
---P--- on the display instead of the phone number. If
the number could not be identified for other (technical)
9
en
reasons, you will see ---0--- or
---E--- on the display.
Up to 14 digits can be shown on the display. With longer
numbers the last 14 digits are displayed.
Calls list
The calls list includes up to 50 entries. If the same
subscriber calls more than once, a new entry is not cre-
ated. Up to 99 repeated calls are displayed in the addi-
tional information.
Sequence of list entries: The most recent call is dis-
played in the first position (position number "01"). Older
entries are moved downwards with each new incoming
phone number until they are deleted from the list.
In the calls list you can do the following:
◆
You can scroll through the phone numbers dis-
played,
◆
query additional information:
(a) date and time, if this is transferred from the
telephone system, otherwise only the time accord-
ing to the telephone's internal clock,
(b) frequency of an incoming phone number,
◆
delete entries,
◆
dial a displayed phone number directly.
Viewing caller histories and dialling phone
numbers
If there are entries in the calls list that have you have not
yet seen, the Calls list key flashes.
You can retrieve the calls list, scroll through its entries,
view additional information about a call and call back
directly:
.
Press the Calls list key.
The phone number of the most recent call
appears in the display. Its position number
"01" is displayed to the left of the number.
If the phone number is too long to be dis-
played completely, it will be displayed in
multiple steps.
(You can leave the calls list at any time by
pressing
;
.)