Gigaset 5040 Manual page 54

Setting the pause time
If necessary, the pause time of the Pause key
(pause function from second input position) can be
changed to 1, 3 or 6 seconds (default setting: 3 seconds).
º102
Hold down the Set key. Initiate function.
0 2
... 0: 1 sec.; 1: 3 sec.; 2: 6 sec..
º
Hold down the Set key.
Changing the dialling mode
You can choose between two dialling modes:
º#
Hold down the Set key. Press the Hash key.
1 2
/
1: Tone dialling.
2: Pulse dialling without flash function.
º
Hold down the Set key.
The dialling mode is saved.
Changing dialling modes during a call
If your telephone is set to pulse dialling and you want to
use functions that require tone dialling (e.g. remote
access to an answering machine), you can change the
dialling mode during a call.
*
With an open connection: press the Star
key.
o
Enter digits for remote control.
The telephone is reset to the original dialling mode by
hanging up the handset.
8
en
;
Operation on a PABX
Enter/delete an external line prefix
If you are using your telephone on a PABX, you may have
to save one or more external line prefixes. A dialling
pause is set automatically with the external line prefix.
You can save up to three external line prefixes.
º0
º
o
; o
º
Recall key (on a PABX)
During an external call, you can make a recall or divert
the call. To do this, press the Recall key
The subsequent procedure depends on your PABX. By
default, the Recall key is preset to a flash time (interrup-
tion time) of 90 ms for use of new features on public tel-
ephone systems. With a connection to a PABX, it may be
necessary to change the flash time (e.g. 600 ms). For
how to do this, please refer to the operating instructions
for your PABX.
Hold down the Set key. Initiate function.
If no external line prefix has been set in a
location, z appears in the display.
If several external line prefixes are saved,
these are displayed next to one another; the
current external line prefix to be edited
flashes.
;
If necessary, use the
between the external line prefixes dis-
played, to edit them as follows:
To delete an external line prefix:
Hold down the Set key.
To enter an external line prefix:
Enter a one- to three-digit code.
Enter additional external line prefixes:
Press the Redial key, enter next external line
prefix.
Hold down the Set key.
key to toggle
º
.