Bushnell ONIX 36-1100 Quick Start Manual page 12

Fig. 20
Fig. 21
Fig. 22
12
Fig. 23
Creating a Trail Log (continued)
• Select Off to disable logging of the trail.
• Select Fill to save trails with no more than 2500 trail
points.
• Select Wrap to create trails in a cyclical manner. After a
trail log with 2500 track points is saved, new trail points
are saved by overwriting the old trail points starting from
0.
•Select Continue (Fig. 21) to create a single continuous
trail log of all trail points. You can save up to 8 continuous
trail logs.
3. Press the Menu button to view the trail log menu and
select from the following options:
• Select Clear Trail to clear the current trail points (Fig.
22).
• Select Save Trail to save the current trail log to the
system's internal flash memory. Up to 8 trail logs can be
saved.
• Select Trail Distance to calculate the distance from the
start point to the end point.
• Select Trail Area to calculate the trail area from the start
point to the end point.
• Select Delete to delete the selected trail log.
• Select Show ON to display the trail log.
4. Under the Type tab (Fig. 23), follow the steps below to
select the tracking method using distance or time intervals:
• Highlight the Dist Interval field and press OK, select
the distance interval and press OK to save your settings
(select the ----- option if you do not wish to specify the
distance interval).
• Highlight the Time Interval field and press OK, select the
time interval and press OK to save your settings (select the
----- option if you do not wish to specify the time interval).
7. Use the Down navigation key to highlight the √
option and press OK to save changes.
NOTE:
• If you select a value for both the distance interval and time
interval, a trail point is recorded when either of the interval
value is reached.
• To ensure the integrity of data structure, the trail log cannot be
saved into non-volatile memory when battery is low. Make sure
the battery charge is adequate to ensure data is retained.