Advertisement
How to...
1. Make a Bag from a FoodSaver
1. Open lid and place roll into Roll Storage.
2. Lift up Roll Cutter Bar and place bag material
beneath the Cutter Bar. Pull bag material to edge until
it is on top of the sealing strip and close lid.
3. Turn Easy Lock Latch to the OPERATE position and
Press the SEAL Button. When the seal indicator light
turns off, sealing is complete.
4. Turn Easy Lock Latch to the OPEN position, open
lid and pull bag material out to desired length.
5. Slide bag cutter across cutter bar.
Now you are ready to vacuum seal with your new bag
(see next page).
8
Roll
®
Place Bag on Sealing Strip
Close and slide Lock Latch to OPERATE position
Press Seal Button
Advertisement
