Download Print this page

FoodSaver VS2198 Series User Manual page 18

Cut & seal vacuum sealer

Advertisement

Troubleshooting (cont.)
Problem
Nothing happens
when Latch is closed
and Button is pressed
Cannot insert bag
into machine
Air was removed from
the bag, but now air
has re-entered
Bag melts
If you need further
assistance:
Container does not
vacuum
18
Solution
• Make sure unit is plugged in.
• Make sure wall outlet is functional.
• Open Latch, make sure lid is all the way down, re-latch lid.
• Make sure there is enough bag material to reach centre of drip tray. Always
allow three inches (7.5 cm) extra space to allow the bag to seal tightly
around food contents.
• Gently stretch bag flat while inserting. Insert bag CURL DOWN into Vacuum
Channel (drip tray).
• Examine the seal. A wrinkle along the seal may cause air to re-enter the
bag. To prevent wrinkles in the seal, gently stretch bag flat while inserting
bag into Vacuum Channel (drip tray).
• Sometimes moisture or food material (such as juices, grease, crumbs,
powders, etc.) along seal prevents bag from sealing properly. Cut bag open,
wipe top inside of bag and reseal.
• Sharp food items may have punctured bag. Use a new bag if there is a
hole. Cover sharp food items with a soft cushioning material, such as a
paper towel, and reseal.
• Fermentation or the release of natural gases from inside the foods may
have occurred. When this happens, food may have begun to spoil and
should be discarded.
• Sealing Strip may have become too hot. Always wait at least 20 seconds
for appliance to cool down before you vacuum seal another item.
• Use FoodSaver
brand bags. Our FoodSaver
®
designed for FoodSaver
• Call Consumer Services at 1300 881 861 in Australia, or 0800 786 232 in
New Zealand.
• For additional tips and answers to frequently asked questions, go to
AU: foodsaver.com.au or NZ: foodsaver.co.nz and click the "Support" tab.
• The lid of the container must be correctly placed on and aligned to the
container
• Assure the Handheld Sealer Hose adaptor is pushed into the unit until you
hear it "click"
• Firmly press the hose end into the container
• Assure side handle is turned to OPERATE
• Press the Vacuum and Seal button
®
units.
®
Bags and Rolls are specially

Advertisement

loading