Device - Gateway MX6452 User Manual

CHAPTER 6: Connecting Devices
Installing a printer, scanner,
digital camera, or other peripheral

device

Important
Before you install a
printer, scanner, or
other peripheral
device, see the device
documentation and
installation
instructions.
Tips & Tricks
For the location of
these ports on your
notebook, see the
poster or hardware
guide. For the location
of these ports on an
optional port
replicator, see the port
replicator user guide.
Help and
Support
For more information
about installing
peripheral devices,
click Start, then click
Help and Support.
Type the keyword
installing devices
in the Search box,
then click the arrow.
72
Your notebook or optional port replicator has
one or more of the following ports: IEEE 1394
(also known as Firewire
Serial Bus (USB), serial, parallel, TV out, S/PDIF
(digital audio), and S-Video (digital video). You
use these ports to connect peripheral devices
such as printers, scanners, and digital cameras to
your notebook or port replicator.
IEEE 1394 and USB ports support plug-and-play
and hot swapping, which means that your
notebook will usually recognize such a device
whenever you plug it into the appropriate port.
When you use an IEEE 1394 or USB device for the
first time, your notebook will prompt you to
install any software the device needs. After
doing this, you can disconnect and reconnect
the device at any time.
Parallel and serial port devices are not
plug-and-play. See the device documentation
for detailed information and installation
instructions.
Installing a USB printer or scanner
USB devices may have special installation
instructions. See your USB device's installation
guide.
Installing a parallel port printer
You can usually install parallel port printers by
following these steps.
To install your printer:
Shut down and turn off your notebook.
1
Connect your parallel port printer.
2
Turn on your printer, then turn on your
3
notebook.
® ®
or i.Link ), Universal