Gateway M285 Hardware Reference Manual page 59

www.gateway.com
If the cover is not correctly replaced, your
convertible notebook could be damaged
when you try to close the LCD panel.
Tips & Tricks
The screw holes are marked with a K.
Insert the tabs on the front edge of the keyboard into the slot under the
4
palm rest. You may need to press down on the keyboard keys along the
front edge of the keyboard to seat the retaining tabs into their
corresponding slots.
Gently press the keyboard down until it is flat all the way across. The
5
keyboard should easily fall into place. Be careful not to damage the
LCD panel.
Slide the tabs on the bottom side of the keyboard cover under the
6
convertible notebook frame.
Press down on the cover in several places until it clicks in place.
7
The keyboard cover is correctly mounted when you can run your finger
Caution
along the cover and find no loose spots. The cover should be flat all the
way across.
Turn the notebook over so the bottom is facing up, then replace the
8
keyboard screws.
Insert the main and optional multibay batteries, then turn your convertible
9
notebook over.
Connect the optional port replicator.
10
-OR-
Connect the power adapter, modem cable, and network cable, then turn
on your convertible notebook.
Replacing the keyboard
55