Gateway 6010GZ Hardware Replacement Manual page 6

8 If your new hard drive already includes the
hard drive cover, go to Step 13.
-OR-
If you need to move the hard drive cover from
your old hard drive to your new hard drive, go
to Step 9.
9 Remove the four screws that secure the hard
drive to the hard drive cover.
Screws
10 Remove the cover from the old drive.
2
11 Place the new drive, label side up, onto the
12 Replace the four screws that secure the cover
13 Slide the new hard drive kit into your
14 Insert the battery, then turn your notebook
15 Connect the power adapter, modem cable, and
16 Turn on your notebook.
17 For instructions on installing Windows, your
Screws
Technical Support
See the label on the bottom of the notebook for
Customer Care information.
Safety, Regulatory, and Legal
Information
See your user guide for important safety, regulatory, and
legal information.
© 2005 Gateway, Inc. All rights reserved. Gateway, Gateway
Country, the Gateway stylized logo, and the black-and-white
spot design are trademarks or registered trademarks of Gateway,
Inc. in the United States and other countries. All other brands
and product names are trademarks or registered trademarks of
their respective companies.
www.gateway.com
Replacing the Hard Drive Kit
cover so the screw holes line up.
to the drive.
notebook, then replace the cover screws.
over.
network cable.
drivers, and your applications, see the
instructions that were included in the
restoration booklet.