Mounting - Fujitsu 5GRUDB3 User Manual

86
Installation

Mounting

4.2
Mounting
RU can be installed on a wall or pole away from the antenna. Heat generated by the RU can be radiated to the
antenna through the mounting bracket. Mounting details, for example, configuration and position of the
mounting bracket, are determined after consultation with the antenna vendor.
Mounting an RU has the following requirements.
■ Mounting the RU requires a pole to be within 2 to 4.5 inches in diameter.
■ The wall mounting surface and anchors must be able to withstand up to 240 lbs (108.862 kg) of weight.
The following graphic shows an RU attached to a pole with a pole mounting kit.
Figure 9
Pole Mount Final Result
Fujitsu and Fujitsu Customer Use Only
·
Issue 1.1, May 2021
Release 1.0