Unpack - Fujitsu 5GRUDB3 User Manual

Installation

Unpack

4.1
Unpack
When unpacking the RU, do not remove the foam blocks attached to the antenna connectors, as the foam
protects the antenna connectors during installation.
Warning: While unpacking the RU, do not remove the foam blocks
attached to the antenna connectors, as the foam protects the
antenna connectors during installation.
Note: If the RU is not being installed immediately after unpacking, keep the caps on the connectors of the RU
and store it in an area protected from rain and water in accordance with
To unpack the shipping package:
Step 1
Open the shipping package and carefully remove the contents.
Step 2
Place the RU on packing foam or an anti-static mat.
Step 3
Remove all packing foam that is around the heat sink and unit.
✓
This task is complete.
·
Issue 1.1, May 2021
Release 1.0
Avertissement: Lors du déballage du RU, ne retirez pas les blocs de
mousse attachés aux connecteurs d'antenne, car la mousse protège
les connecteurs d'antenne lors de l'installation.
Transport and Storage
85
Requirements.
Fujitsu and Fujitsu Customer Use Only