Fujitsu 5GRUDB3 User Manual page 72

Dual-band radio unit
Table of Contents

Advertisement

RU Hardware Feature
Performance Requirement
Table 25 (Cont.)
Spurious Emissions
Frequency Range
5091 MHz...5150 MHz
5150 MHz...5350 MHz
5350 MHz...5470 MHz
5470 MHz...5850 MHz
5850 MHz...5925 MHz
5925 MHz...127500 MHz
Transmitter Intermodulation
The transmitter intermodulation level does not exceed the unwanted emission limits in clauses ACLR, OBUE and
Spurious Emissions in the presence of an NR interfering signal according to the following criteria:
Wanted Signal type
Interfering Signal type
Interfering Signal level
Interfering signal center frequency
offset from the lower/upper edge of
the wanted signal or edge of sub-
block inside a sub-block gap
Modulation Quality
Table 26
Error Vector Magnitude (EVM)
Modulation Scheme
QPSK
16QAM
64QAM
256QAM
·
Issue 1.1, May 2021
Release 1.0
Maximum Level*
< –30 dBm
< –70 dBm
< –52 dBm
< –70 dBm
< –52 dBm
< –30 dBm
NR single carrier, or multi-carrier, or multiple intra-band contiguously or non-
contiguously aggregated carriers, with NB-IoT operation in NR in-band if
supported.
NR signal, the minimum base station channel bandwidth with 15 kHz SCS: 5 MHz
for n70, n66
Rated total output power (Prated, t, AC) in the operating band –30 dB
for n=1, 2, and 3
Required EVM
≤ 17.5%
≤ 12.5%
≤ 8%
≤ 3.5%
Measurement Bandwidth
1 MHz
100 kHz
1 MHz
100 kHz
1 MHz
1 MHz
Test Tolerance
1.0%
Fujitsu and Fujitsu Customer Use Only
72

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents