Fujitsu 5GRUDB3 User Manual page 73

RU Hardware Feature
Performance Requirement
Dynamic Range
Table 27
Total Power Dynamic Range (15 kHz SCS)
Base Station Channel Bandwidth (MHz)
5
10
1
15
20
1 15 MHz is not currently supported.
Table 28
RE (Resource Element) Power Control Dynamic Range
Modulation Scheme Used On The RE
QPSK Physical Downlink Control Channel
(PDCCH)
QPSK (PDSCH)
16QAM PDSCH
64QAM PDSCH
256QAM PDSCH
Note: Total TX power is always less or equal to maximum base station output power.
FCC Out-of-Band Emission Specification
FCC rule
CFR 47 § 27.53, CFR 47 § 27.1134 for n70, n66
−19 dBm/RBW per port [= −13 dBm/single-transmit −6 dB (10 x log (4, No. of TX)].
Resolution Bandwidth for Frequency (RBW)
>1 MHz bands immediately outside and adjacent to the frequency block have the following specifications:
200 kHz (Max)
n70
200 kHz (Max)
n66
Outside 1 MHz, the reference bandwidth (1 MHz) is applied.
·
Issue 1.1, May 2021
Release 1.0
Total Power Dynamic Range
≥ 13.9 dB
≥ 17.1 dB
≥ 18.9 dB
≥ 20.2 dB
RE Power Control Dynamic Range
Down
–6 dB
–6 dB
–3 dB
0 dB
0 dB
Test Tolerance
0.4dB
Up
+4 dB
+3 dB
+3 dB
0 dB
0 dB
Fujitsu and Fujitsu Customer Use Only
73