Adjusting The Display Properties - Gateway 200E Reference Manual

4
5
6

Adjusting the display properties

If the image on the projector or monitor does not appear
correctly, or if you want to use the display as an extension
of your notebook desktop, you should adjust the display
properties on the projector or external monitor.
To adjust the display properties on a projector or external
monitor:
1
50
CHAPTER 4: Using Drives and Accessories
Plug the projector's or monitor's power cord into an
AC power source and turn it on.
Windows recognizes the new hardware and the New
Display Detected dialog box opens.
Select the options for the projector or external monitor,
then click OK.
Press F +F4 to switch between viewing the display on
N
the LCD panel, viewing the display on the projector or
monitor, and viewing the display on both the LCD panel
and the projector or monitor.
Important
If an external monitor or projector is connected and you close
the LCD panel, your notebook may turn off the LCD panel, but will not
enter Sleep mode.
Click (Start), All Programs, Accessories
Windows Mobility Center. The Windows Mobility
Center window opens.
Tip
For more information about the Windows Mobility Center, see
"Using the Windows Mobility Center" in your online User Guide.
then click
,