Networks (Wireless) - Gateway 200E Reference Manual

You cannot connect to your home network
•
•

Networks (wireless)

You turned wireless networking on, but it takes a while to
connect
•
Your connection on the network seems intermittent or your
wireless network is running slower than you expect
•
www.gateway.com
If your notebook is a member of a domain at your
workplace, you may not be able to connect your
notebook to your home network workgroup to access
shared files or printers on your home network. You may,
however, be able to access the Internet through your
home network.
Caution
If your notebook was a member of a domain before you join a
workgroup, it is disjoined from the domain and your computer account
disabled. Contact your company computer department or network
administrator for more information.
Every home network is unique. See the documentation
that came with your network equipment for
troubleshooting information.
When wireless networking is turned on, it automatically
scans for available connections. The scan can take
approximately 30 seconds to complete.
The speed of a wireless network is related to signal
strength. Signal strength is affected by the distance
between your wireless network devices, by radio
interference, and by interference from natural
obstructions such as walls, ceilings, floors, and doors.
If your wireless network is running slower than you
expect, you should check your network signal strength.
If you find the signal strength is low, try moving to a
new location to increase the signal strength.
Important
Note any antenna placement constraints in the access point user
guide because the speed of a wireless network is related to signal
strength. Signal strength is affected by the distance between your
wireless network devices, by radio interference, and by interference
from natural obstructions such as walls, floors, and doors.
123