Electrical Connections - Viessmann Solar-Divicon PS10 Installation And Service Instructions Manual

Installing the Solar-Divicon
Information on the Solar-Divicon, type PS10 with
solar control unit
For maintenance and service work, the solar control
unit can be hooked into the side of the circulation
pump.

Electrical connections

Version with solar control unit:
■
The circulation pump is connected to the solar con-
trol unit at the factory.
See the solar control unit installation and service
instructions for further connections.
■ Version without solar control unit:
Route the connecting cable for the circulation pump
downwards through the cable trunking and connect it
to the solar control unit.
See the solar control unit installation and service
instructions for further connections.
(cont.)
Installation sequence
13