Rear Suspension; Tire Pressure - Suzuki LT-R450K6 Setup Manual

Hide thumbs Also See for LT-R450K6:
Table of Contents

Advertisement

REAR SUSPENSION

Low Speed Compression Damping Force Adjustment
Adjust the setting of the low speed compression damp-
ing force to the standard position.
To adjust, turn the adjuster A clockwise until it stops
and then turn it counterclockwise until 8 clicks are felt.
Do not force the adjuster screw A past the
stopped position or you may damage the
adjuster.
High Speed Compression Damping Force Adjustment
Adjust the setting of the high speed compression
damping force to the standard position.
To adjust, turn the adjuster B clockwise until it stops
and then turn it counterclockwise until approximately
3/4 turns are felt and the two punch marks align.
Do not force the adjuster B past the stopped
position or you may damage the adjuster.
Rebound Damping Force Adjustment
Adjust the setting of the rebound damping force to the
standard position.
To adjust, turn the adjuster C clockwise until it stops
and then turn it counterclockwise until 7 clicks are felt.
Do not force the adjuster screw C past the
stopped position or you may damage the
adjuster.

TIRE PRESSURE

Using an accurate air gauge, check the air pressure of
the front and rear tires.
The pressure should be as shown.
COLD INFLATION TIRE PRESSURE
LOAD
FRONT
45 kPa
Up to 110 kg
0.45 kgf/cm
(243 lbs)
6.5 psi
22
TIRE PRESSURE
REAR
45 kPa
0.45 kgf/cm
2
2
6.5 psi

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents