Brake Fluid; Front Brake Lever - Suzuki LT-R450K6 Setup Manual

Hide thumbs Also See for LT-R450K6:
Table of Contents

Advertisement

FRONT
REAR
1. Set the battery to the box.
2. First connect the + lead to the + positive terminal
of the battery.
3. Cover + terminal with rubber boot.
4. Connect the - lead to the - negative terminal of
the battery.
5. Reinstall the battery cover using the screw.
A: + lead
B: - lead
C: Rubber boot

BRAKE FLUID

Keep the vehicle upright and place the handlebars
straight.
Check the brake fluid level in both the front and rear
master cylinder reservoirs.
If the fluid level is below the lower level indicated in the
figure, add the correct type of brake fluid.
Refer to the chart below for the proper selection.
Specification and Classification
Be careful not to spill any brake fluid on the
paint or plastic components as they will be
damaged.
A: Lower level line
B: Upper level line

FRONT BRAKE LEVER

Check the brake lever play at the adjuster bolt.
Front brake lever adjuster bolt length: 11–15 mm
If adjustment is necessary, carry out the procedure
below:
1. Loosen the lock nut A.
2. Turn the adjuster B in or out until the correct length.
3. Tighten the lock nut A.
16
DOT 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents