Attention Light - FujiFilm Apeos 4570 Reference Manual

Offset
Note
Offset on the Extra Center Tray is optional. Offset cannot be performed on the Side Tray.
The paper is output with offset stacking for easy separation.
Use the printer driver to set the offset of outputs.
Paper size (mm)
Paper weight (g/m

Attention Light

Center Tray
Center Tray Attention Light starts blinking after a print job is
started and lights up after the printing is finished. So, you can
check the printing progress even when you are away from the
machine.
Also, the Center Tray Attention Light remains lit when ejected
paper is still remaining on the Center Tray or Side Tray.
Note
Center Tray Attention Light may not blink or light up depending

on the output tray used and method of finishing the job.
 In the Power Saver Mode, the Center Tray Attention Light does not turn on.
Refer
From > [Settings] > [Maintenance] > [NVM Read/Write], ON/OFF of the Center Tray Attention Light

can be changed for each paper output tray. For details, refer to "Settings" in "Reference Guide -
Operations".
Duplex Automatic Document Feeder
The light is turned ON when a document is read and notifies the
document position.
Note
The light is not turned ON when a document is jammed or a job is
canceled.
20
3 Basic Operations of the Machine
Width Up to 297
Length Up to 432
2 52 to 256
)