Tune Dgps Beacon Receiver (Pslib) - Garmin GPS 16 Technical Specifications

Gps 16/17 series

Hide thumbs Also See for GPS 16:

Table of Contents

4.1.6

Tune DGPS Beacon Receiver (PSLIB)

The $PSLIB sentence provides the ability to tune a Garmin GBR 21, GBR 23 or equivalent beacon

receiver.

$PSLIB,<1>,<2>*hh<CR><LF>

<1>

Beacon tune frequency, 0.0, 283.5–325.0 kHz in 0.5 kHz steps

<2>

Beacon bit rate, 0, 25, 50, 100, or 200 bps

If valid data is received, the GPS sensor will store it in the EEPROM and echo the PSLIB command to the

beacon receiver. If the GPS sensor is using any stored beacon frequency other than 0.0, it will tune the

beacon receiver once immediately after power up or external reset.

190-00228-20

GPS 16/17 Technical Specifications

Page 15

Rev. C

Table of Contents

Show Quick Links

Table of Contents

Gps 17 Gps 16lvs Gps 16hvs Gps 17hvs Gps 17n Gps 16a