Make Electrical Connection - Jenn-Air W10692945 Installation Instructions And Use & Care Manual

Non-Vented (Recirculating) Installations: Connect the flexible
hose to the air diverter and fix it with a clamp (not supplied) as
shown in figure.
10

Make Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Remove terminal box cover.
3. Remove the knockout in the terminal box, and then install a
UL listed or CSA approved 1/2" (12.7 mm) strain relief.
4. Run home power supply cable through strain relief and into
the terminal box.
5. Use UL listed wire connectors and connect black wires (L)
together.
6. Use UL listed wire connectors and connect white wires (N)
together.
Ø3.5x9.5 mm