Repeat Play; Random Play; On The Faceplate; Reverse/Fast-Forward Press And Hold - JVC KD-SX24BT Instruction Manual

BLUETOOTH®
BLUETOOTH — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio
devices and switch between these five devices.
Audio player via Bluetooth
1

Press

repeatedly to select BT AUDIO.
2
Operate the Bluetooth audio player to start playback.
To
Playback/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward

Repeat play

Random play

Select a file from a folder/
list
Switch between connected
Bluetooth audio devices
16
ENGLISH

On the faceplate

Press the volume knob.
Press .
Press .
Press and hold .
Press repeatedly.
TRACK REPEAT, ALL REPEAT, REPEAT OFF
Press repeatedly.
GROUP RANDOM, ALL RANDOM, RANDOM OFF
Refer to "Select a file from a folder/list" on
page 8.
Press 5. *
* Pressing the "Play" key on the connected device itself also causes switching of sound output
from the device.
Operations and display indications may differ according to their
availability on the connected device.
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver's
operations from the iPhone/iPod (via Bluetooth or via USB input terminal)
or Android smartphone (via Bluetooth).
Preparation:
Install the latest version of JVC Remote application on your device before
connecting. For more information, visit <http://www.jvc.net/cs/car/>.
1
Press and hold .
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
REMOTE APP
SELECT Select the device (IOS or ANDROID) to use the application.
IOS YES: Selects iPhone/iPod to use the application via Bluetooth or connected
via USB input terminal. ; NO: Cancels.
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is
connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via
the USB input terminal.
– You change from iPod USB source to iPod BT source.
.
Default: XX