Pairing the zūmo with Your
Mobile Phone
1. Enable the Bluetooth setting on your
zūmo. Touch
Tools
>
Settings
Bluetooth.
2. Select Enabled.
Tools
Settings
> Bluetooth.
3. Touch
>
4. Under Phone, touch
Add
5. Enable the Bluetooth component on your
phone. Enable Find Me/Discoverable/
Visible mode. These settings might be in
a menu called Bluetooth, Connections, or
Hands‑free.
5. Touch
OK
on the zūmo.
6. Select your phone, and touch OK.
7. Enter
1234
into your phone.
zūmo 600 Series Owner's Manual
Receiving a Call
When you receive a call, the Incoming Call
window appears. Touch
>
the call. Touch
silence the ring.
The internal microphone is in the front of the
zūmo.
(or Change).
In a Call
To end a call, touch
>
Call options
•
Touch Tones—displays a keypad page so
you can use automated systems, such as
voice mail.
•
Transfer audio To Phone—this is
helpful if you want to turn off the zūmo
but stay on the call, or if you need
privacy. To switch back, touch
audio To
•
Mute Microphone.
answer
to answer
ignore
to ignore the call and
end
Call. Touch
>
for the following options:
Transfer
Device.
Using Hands‑free Calling
Phone Menu
From the Menu page, touch
Phone
the Phone menu. Touch
Status
signal strength, the battery level, and the
name of the connected phone.
noTe: Not all phones support all features
of the zūmo Phone menu.
Using Your Phone Book
Each time your mobile phone connects with
the zūmo, the phone book is automatically
loaded into the zūmo. It may take a few
minutes for the phone book to be available.
1. Touch
Phone
>
Phone
Book.
2. Touch the phone book entry (contact) you
want to call.
3. Touch
Dial
to call the contact.
to view
to view the
21