Garmin Zumo 660 Owner's Manual page 10

Getting Started
Step 3: Attaching the Base Plate
to Your zūmo Mount
1. Thread the M4 pan head screws through
the washers, the cradle, the spacers, and
the base plate.
2. Tighten the nuts to secure the base plate.
Cradle
Washers
Pan head screws

Step 4: Attaching the Base Plate
to the Handlebar Base
1. Align the ball of the handlebar base and
the ball of the base plate with the double‑
socket arm.
2. Tighten the knob slightly.
3. Adjust for better viewing and operation.
Base plate
4. Tighten the knob to secure the mount.
Cradle
Spacers
Nuts
Power cable
Base plate
Double-socket arm
Knob
Handlebar base
Step 5: Installing Your zūmo in
the Mount
1. Fit the bottom of your zūmo into the
cradle.
2. Tilt the zūmo back until it snaps into
place.
Cradle
Release button
Power
cable
zūmo 600 Series Owner's Manual